Capabilities

The mill, spec by spec.

30,000 spindles. 20 tonnes of yarn a day. Combed compact as the house standard. Everything below is verifiable on a buyer audit, and most of it is tested per lot.

30,000
Spindles installed
20 TPD
Yarn produced daily
Ne 16 to 80
Count range
100%
Renewable powered
Machinery

Engineered for consistency, not shortcuts.

Each stage uses equipment specified for mill-grade cotton and combed compact output. We maintain OEM service contracts and keep a running spares inventory so the floor never stops for a parts delay.

01.

Blow room

Trutzschler bale-opening line with multi-stage cleaning. Removes trash, short fibre, neps, and metal before the lap ever sees a card. Cotton quality starts here.

02.

Carding

High-production cards with autoleveller. Individualises fibres, removes residual trash, delivers an even sliver at constant weight per metre.

03.

Combing

Rieter combers removing 15 to 20% noil. Lifts short fibre out of the sliver so the finished yarn has lower hairiness, higher strength, and a cleaner surface for weaving.

04.

Draw frame

Two passages with autoleveller and spectrograph monitoring. Levels CV% and parallelises fibre so the roving comes in at a steady count.

05.

Ring spinning with compact

Ring frames fitted with compact-spinning attachments on every spindle. Compact draft zone reduces hairiness by 30 to 40% vs conventional ring, which is why our yarn runs cleaner on an airjet loom.

06.

Winding and packing

Autoconer with Uster Classimat electronic yarn clearing. Every metre cleared for thin places, thick places, neps. Cones packed PE-in-HDPE, carton or container stuffed to spec.

Quality Control

Tested on every lot. Certified to every standard your buyers ask for.

Lab setup

  • Uster HVI 1000 for every bale: Mic, strength, staple, colour, trash.
  • Uster Tester 6 for finished yarn: U%, CVm, thin, thick, neps, hairiness, imperfections.
  • Uster Classimat on the autoconer: continuous electronic clearing.
  • Uster Tensojet: single-end yarn tensile at 400 m/min.
  • Statistical Process Control: end-breaks per 1000 spindle-hours, ring-frame doffer averages, reviewed daily by the shift supervisor.

Active certifications

  • ISO 9001 (Quality)Active
  • GOTS (Organic cotton chain)Active
  • OEKO-TEX Standard 100Active
  • BCI (Better Cotton)Active
  • SEDEX SMETA 4-pillarActive
  • Uster Statistics benchmarkVerified

Full audit reports and current certificate copies on request to qualified buyers under NDA.

Power and infrastructure

Run on renewable energy. Audited for everything else.

6 MW captive solar

Covers 30,000 kWh/day of mill demand. On a normal production day the grid draw is zero. Commissioned 2023, operating within 2% of modelled yield.

Humidification and air

Closed-loop humidification maintains relative humidity at 55 to 60% across spinning floors. Luwa filtration recovers lint and returns conditioned air.

Water recovery

ETP with multi-stage treatment. Recovered water used for humidification make-up and gardens, not discharged to drain.

Vertical integration upstream

Shreeram Group ginning units supply a share of our raw cotton. Full lint traceability from farmer to bale to lot on request.

Walk the floor

The machinery, the lab, the certificates. See it for yourself.

We prefer buyers who audit us. Visit the mill, meet the team, see the process end to end. Our commercial desk arranges visits within one working day of request.